92541-83999 | 89501-38444
thymolautoclaveindia@gmail.com | thymolindia@gmail.com
92541-83999 | 89501-38444
thymolautoclaveindia@gmail.com | thymolindia@gmail.com


  • The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding.
  • The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses.
  • Hydraulically tested to withstand 2.5 times the working pressure.
  • Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device.
  • Drain valve is fitted at the side bottom for easy draining/clearing.
  • This affords a complete safety to the working personnel against explosive opening.
  • Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired.
  • Sterilization cycle is controlled by single point multiport valve.
  • The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized.
  • An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.
  • The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device.
  • All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator.
  • The chamber is fitted with spring loaded safety valve and a dead weight release valve.
  • To work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply.


  • Gasket: made of joint less silicon rubber
  • Exhaust pressure: manual through the exhaust valve Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at o121C
  • Operating pressure: from 15 psi to 20 psi
  • Pressure gauge: 0.2.1 kgf/cm2 (30 psi)
  • Tubular stand and supporting ring: made of mild steel or stainless steel
  • Pressure Vessel= SS 304 Grade Stainless Steel
  • External Wall=SS 304 Grade Stainless Steel
  • Top Lid=SS 304 Grade Stainless Steel
  • Basket= SS 304 Grade Stainless Steel


  •  Automatic pressure cut off switch
  • Digital temperature indicator cum controller
  • Vacuum breaker
  • Water level indicator
  • Automatic self locking system
  • Automatic low water cut off switch
  • Moisture trap
  • Fully automatic system with HMI PLC based autoclave with data logger digital pressure indicator cum controller, digital temperature controlled system can be installed on order.
  • Vacuum Pump


There are no reviews yet.


Your email address will not be published. Required fields are marked *